Quartz tops cut to your size, for any vanity or counter. You don't need to buy one of our vanities. Bring your own cabinet, replace an old top, or do a kitchen or laundry counter. We cut to your width and depth, make the sink cut-out and faucet holes where you want them, and add a backsplash and side splashes to match.
- Vanity tops in any width, single or double sink
- Kitchen, laundry and bar counters, straight runs, L-shapes and islands
- Undermount sink cut-outs (we can supply the sink), or vessel and drop-in
- Faucet drilling: single hole, 4″ centreset or 8″ widespread
- Backsplash and side splash in the same quartz
- Colours: the ones in our showroom, plus nearly any colour from our local fabricators
How to measure
Rough numbers are fine for a price. We confirm everything with you before anything is cut.
Looking down at the counter
Three numbers, in inches
- A: Width. Measure along the wall, end to end. If the counter fits between two walls, measure wall to wall at the back and the front and give us the smaller one.
- B: Depth. Measure from the wall to the front edge you want. Vanity tops are usually 19–22″ deep and kitchen counters about 25½″.
- C: Sink centre. Measure from the left end of the counter to the middle of the sink. The easy way is to measure from the left end to the drain pipe coming out of the wall, or to the middle of the cabinet's sink section. For a double sink, give both centres from the left end.
Tip: tape painter's tape where you want the sink and snap a photo with the tape measure in it. Then you can text it to us after you send the form.
Get a countertop quote
Send your sizes and we'll reply within one business day with a price and the colours available.
Thanks, we've got your sizes.
We'll reply within one business day. To speed things up, send a photo of the cabinet or old counter with a tape measure in the shot.
Pickup at 125-11960 Hammersmith Way, Richmond, BC. Questions? Call or text 778-994-4994.